| 1. |
- Jafari Jam, Reza, et al.
(author)
-
III-V nanowire synthesis by use of electrodeposited gold particles
- 2015
-
In: Nano letters (Print). - Washington, DC : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:1, s. 134-138
-
Journal article (peer-reviewed)abstract
- Semiconductor nanowires are great candidates for building novel electronic devices. Considering the cost of fabricating such devices, substrate reuse and gold consumption are the main concerns. Here we report on implementation of high throughput gold electrodeposition for selective deposition of metal seed particles in arrays defined by lithography for nanowire synthesis. By use of this method, a reduction in gold consumption by a factor of at least 300 was achieved, as compared to conventional thermal evaporation for the same pattern. Because this method also facilitates substrate reuse, a significantly reduced cost of the final device is expected. We investigate the morphology, crystallography, and optical properties of InP and GaAs nanowires grown from electrodeposited gold seed particles and compare them with the properties of nanowires grown from seed particles defined by thermal evaporation of gold. We find that nanowire synthesis, as well as the material properties of the grown nanowires are comparable and quite independent of the gold deposition technique. On the basis of these results, electrodeposition is proposed as a key technology for large-scale fabrication of nanowire-based devices.
|
|
| 2. |
- Jafari Jam, Reza, et al.
(author)
-
Template-assisted vapour-liquid-solid growth of InP nanowires on (001) InP and Si substrates
- 2020
-
In: Nanoscale. - Cambridge : Royal Society of Chemistry. - 2040-3364 .- 2040-3372. ; 12:2, s. 888-894
-
Journal article (peer-reviewed)abstract
- We report on the synthesis of vertical InP nanowire arrays on (001) InP and Si substrates using template-assisted vapour-liquid-solid growth. A thick silicon oxide layer was first deposited on the substrates. The samples were then patterned by electron beam lithography and deep dry etching through the oxide layer down to the substrate surface. Gold seed particles were subsequently deposited in the holes of the pattern by the use of pulse electrodeposition. The subsequent growth of nanowires by the vapour-liquid-solid method was guided towards the [001] direction by the patterned oxide template, and displayed a high growth yield with respect to the array of holes in the template. In order to confirm the versatility and robustness of the process, we have also demonstrated guided growth of InP nanowire p-n junctions and InP/InAs/InP nanowire heterostructures on (001) InP substrates. Our results show a promising route to monolithically integrate III-V nanowire heterostructure devices with commercially viable (001) silicon platforms.
|
|
| 3. |
- Jain, Vishal, et al.
(author)
-
Bias-dependent spectral tuning in InP nanowire-based photodetectors
- 2017
-
In: Nanotechnology. - Bristol : IOP Publishing. - 0957-4484 .- 1361-6528. ; 28:11
-
Journal article (peer-reviewed)abstract
- Nanowire array ensembles contacted in a vertical geometry are extensively studied and considered strong candidates for next generations of industrial scale optoelectronics. Key challenges in this development deal with optimization of the doping profile of the nanowires and the interface between nanowires and transparent top contact. Here we report on photodetection characteristics associated with doping profile variations in InP nanowire array photodetectors. Bias-dependent tuning of the spectral shape of the responsivity is observed which is attributed to a Schottky-like contact at the nanowire-ITO interface. Angular dependent responsivity measurements, compared with simulated absorption spectra, support this conclusion. Furthermore, electrical simulations unravel the role of possible self-gating effects in the nanowires induced by the ITO/SiO x wrap-gate geometry. Finally, we discuss possible reasons for the observed low saturation current at large forward biases.
|
|
| 4. |
- Jain, Vishal, et al.
(author)
-
InP/InAsP Nanowire-Based Spatially Separate Absorption and Multiplication Avalanche Photodetectors
- 2017
-
In: ACS Photonics. - Washington : American Chemical Society (ACS). - 2330-4022. ; 4:11, s. 2693-2698
-
Journal article (peer-reviewed)abstract
- Avalanche photodetectors (APDs) are key components in optical communication systems due to their increased photocurrent gain and short response time as compared to conventional photodetectors. A detector design where the multiplication region is implemented in a large band gap material is desired to avoid detrimental Zener tunneling leakage currents, a concern otherwise in smaller band gap materials required for absorption at 1.3/1.55 μm. Self-assembled III-V semiconductor nanowires offer key advantages such as enhanced absorption due to optical resonance effects, strain-relaxed heterostructures, and compatibility with mainstream silicon technology. Here, we present electrical and optical characteristics of single InP and InP/InAsP nanowire APD structures. Temperature-dependent breakdown characteristics of p+-n-n+ InP nanowire devices were investigated first. A clear trap-induced shift in breakdown voltage was inferred from I-V measurements. An improved contact formation to the p+-InP segment was observed upon annealing, and its effect on breakdown characteristics was investigated. The band gap in the absorption region was subsequently varied from pure InP to InAsP to realize spatially separate absorption and multiplication APDs in heterostructure nanowires. In contrast to the homojunction APDs, no trap-induced shifts were observed for the heterostructure APDs. A gain of 12 was demonstrated for selective optical excitation of the InAsP segment. Additional electron-beam-induced current measurements were carried out to investigate the effect of local excitation along the nanowire on the I-V characteristics. Simulated band profiles and electric field distributions support our interpretation of the experiments. Our results provide important insight for optimization of avalanche photodetector devices based on III-V nanowires.
|
|
| 5. |
|
|
| 6. |
- Karimi, Mohammad, 1988-, et al.
(author)
-
Intersubband Quantum Disc-in-Nanowire Photodetectors with Normal-Incidence Response in the Long-Wavelength Infrared
- 2018
-
In: Nano letters (Print). - Washington : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:1, s. 365-372
-
Journal article (peer-reviewed)abstract
- Semiconductor nanowires have great potential for realizing broadband photodetectors monolithically integrated with silicon. However, the spectral range of such detectors has so far been limited to selected regions in the ultraviolet, visible, and near-infrared regions. Here, we report on the first intersubband nanowire heterostructure array photodetectors exhibiting a spectrally resolved photoresponse from the visible to long-wavelength infrared. In particular, the infrared response from 3 to 20 μm is enabled by intersubband transitions in low-bandgap InAsP quantum discs synthesized axially within InP nanowires. The intriguing optical characteristics, including unexpected sensitivity to normal incident radiation, are explained by excitation of the longitudinal component of optical modes in the photonic crystal formed by the nanostructured portion of the detectors. Our results provide a generalizable insight into how broadband nanowire photodetectors may be designed and how engineered nanowire heterostructures open up new, fascinating opportunities for optoelectronics.
|
|
| 7. |
- Karimi, Mohammad, 1988-, et al.
(author)
-
Long-wavelength intersubband quantum disc-in-nanowire photodetectors with normal incidence photoresponse
- 2018
-
In: QSIP 2018. ; , s. 55-55
-
Conference paper (peer-reviewed)abstract
- Semiconductor nanowire (NW) technology has emerged as a key facilitator of novel optoelectronics e.g. solar cells, photodetectors and LEDs. The functional wavelength range of current NW-based photodetectors is typically limited to the visible/ near-infrared region. In this work, we present the first ever reported electrical and optical characteristics of longwavelength IR photodetectors based on large square millimeter ensembles of vertically grown and processed InAsP/InP heterostructure NWs grown on InP substrates1 . More specifically, the MOVPE-grown NWs comprise single or multiple InAsP quantum discs (QDiscs) axially embedded in an n+-i-n+ geometry. The NWs are contacted together in a vertical geometry by uniformly depositing a thin insulating SiO2 layer, selective etching of the oxide from the tip of the NWs followed by sputtering of ITO as a common top contact to all NWs. Using Fourier transform photocurrent spectroscopy, we demonstrate a photoresponse extending from the visible to far infrared1,2. In particular, the infrared response from 3-20 μm is enabled by intersubband transitions in the lowbandgap InAsP quantum discs synthesized axially within the InP NWs. The detector elements exhibit an unexpected sensitivity to normal incident radiation, apparently in contradiction to well-known selection rules for intersubband transitions in quantum wells. From in-depth 2D and 3D optical simulations we attribute this result to an excitation of the longitudinal component of optical modes in the photonic crystal formed by the nanostructured portion of the detectors. Key advantages with the proposed design include a large degree of freedom in choice of material compositions, enhanced optical resonance effects due to periodically ordered NW arrays and the compatibility with silicon substrates. We believe that our novel detector design offers a route towards monolithic integration of compact and sensitive broadband III-V NW detectors with main-stream silicon technology which could seriously challenge existing commercially available photodetectors.
|
|
| 8. |
- Karimi, Mohammad, 1988-, et al.
(author)
-
Nanowire photodetectors with embedded quantum heterostructures for infrared detection
- 2019
-
In: Infrared physics & technology. - Amsterdam : Elsevier. - 1350-4495 .- 1879-0275. ; 96, s. 209-212
-
Journal article (peer-reviewed)abstract
- Nanowires offer remarkable opportunities for realizing new optoelectronic devices because of their unique fundamental properties. The ability to engineer nanowire heterostructures with large bandgap variations is particularly interesting for technologically important broadband photodetector applications. Here we report on infrared photodetectors based on arrays of InP nanowires with embedded InAsP quantum discs. We demonstrate a strongly reduced dark current in the detector elements by compensating the unintentional n-doping in the nominal intrinsic region of the InP nanowires by in-situ doping with Zn, a crucial step towards realizing high-performance devices. The optimized array detectors show a broad spectral sensitivity at normal incidence for wavelengths from visible to far-infrared up to 20 μm, promoted by both interband and intersubband transitions. Optical simulations show that the unexpected normal incidence response at long wavelengths is due to non-zero longitudinal modes hosted by the nanowires. © 2018 Elsevier B.V.
|
|
| 9. |
- Karimi, Mohammad, 1988-, et al.
(author)
-
Room-temperature InP/InAsP Quantum Discs-in-Nanowire Infrared Photodetectors
- 2017
-
In: Nano letters (Print). - Washington, DC : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:6, s. 3356-3362
-
Journal article (peer-reviewed)abstract
- The possibility to engineer nanowire heterostructures with large bandgap variations is particularly interesting for technologically important broadband photodetector applications. Here we report on a combined study of design, fabrication, and optoelectronic properties of infrared photodetectors comprising four million n+–i–n+ InP nanowires periodically ordered in arrays. The nanowires were grown by metal–organic vapor phase epitaxy on InP substrates, with either a single or 20 InAsP quantum discs embedded in the i-segment. By Zn compensation of the residual n-dopants in the i-segment, the room-temperature dark current is strongly suppressed to a level of pA/NW at 1 V bias. The low dark current is manifested in the spectrally resolved photocurrent measurements, which reveal strong photocurrent contributions from the InAsP quantum discs at room temperature with a threshold wavelength of about 2.0 μm and a bias-tunable responsivity reaching 7 A/W@1.38 μm at 2 V bias. Two different processing schemes were implemented to study the effects of radial self-gating in the nanowires induced by the nanowire/SiOx/ITO wrap-gate geometry. Summarized, our results show that properly designed axial InP/InAsP nanowire heterostructures are promising candidates for broadband photodetectors. © 2017 American Chemical Society.
|
|
| 10. |
- Nowzari, Ali, et al.
(author)
-
A Comparative Study of Absorption in Vertically and Laterally Oriented InP Core–Shell Nanowire Photovoltaic Devices
- 2015
-
In: Nano letters (Print). - Washington : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:3, s. 1809-1814
-
Journal article (peer-reviewed)abstract
- We have compared the absorption in InP core-shell nanowire p-i-n junctions in lateral and vertical orientation. Arrays of vertical core-shell nanowires with 400 nm pitch and 280 nm diameter, as well as corresponding lateral single core-shell nanowires, were configured as photovoltaic devices. The photovoltaic characteristics of the samples, measured under 1 sun illumination, showed a higher absorption in lateral single nanowires compared to that in individual vertical nanowires, arranged in arrays with 400 nm pitch. Electromagnetic modeling of the structures confirmed the experimental observations and showed that the absorption in a vertical nanowire in an array depends strongly on the array pitch. The modeling demonstrated that, depending on the array pitch, absorption in a vertical nanowire can be lower or higher than that in a lateral nanowire with equal absorption predicted at a pitch of 510 nm for our nanowire geometry. The technology described in this Letter facilitates quantitative comparison of absorption in laterally and vertically oriented core-shell nanowire p-i-n junctions and can aid in the design, optimization, and performance evaluation of nanowire-based core-shell photovoltaic devices. © 2014 American Chemical Society.
|
|
